1x 'H8R Power Pad' upgrade accessory for the Umarex Elite Force H8R airsoft revolver.
Possibly the easiest and quickest upgrade; simply pushes on to the hammer spur of the revolver and provides increased velocity and shot-to-shot consistency. Ideal for shooting heavier BBs or giving the H8R a needed boost in the winter.
Just as quick to remove, which may be preferable on very hot summer days when the velocity may exceed site limits, and far more convenient than an internal upgrade!
Rubberised textured finish makes single-action cocking comfortable, and we think it adds to the unique look of the H8R
The H8R is a fantastic airsoft revolver; however, despite the CO2 power source, the velocity can be a bit lacking compared to some other airsoft sidearms, especially in colder months.
The H8R Power pad is a simple solution: A very high density rubberised pad that fits onto the spur of the hammer. This increased inertia allows the CO2 valve to remain open for longer, providing more gas and thus more power.
Made from high-density poly tungsten, the pad also increases shot consistency due to working like a 'deadblow hammer', that is the flexible mass stops the hammer and valve from bouncing, providing a much more consistent shot-to-shot velocity.
Typical gain is 20-25fps with 0.28g BBs. Lighter BBs will actually gain a little less velocity than this due to the velocity limits of gas expansion; heavier BBs will also gain less velocity but overall more energy due to the increased mass. So it is most suited to lifting those heavier BBs: 0.28g, 0.32g, even up to 0.4g, for extra range in outdoor skirmish sites.
This is designed to fit the H8R Gen 1 and Gen 2 CO2 6mm airsoft revolvers, it may work on other airsoft revolvers if it fits on the hammer, however we cannot provide information on this, as we have only tested it on the H8R.
Package includes 1x H8R Power Pad, weighing 7g
This accessory is designed for airsoft and can only be used for airsoft.
1x 'H8R Power Pad' upgrade accessory for the Umarex Elite Force H8R airsoft revolver.
Possibly the easiest and quickest upgrade; simply pushes on to the hammer spur of the revolver and provides increased velocity and shot-to-shot consistency. Ideal for shooting heavier BBs or giving the H8R a needed boost in the winter.
Just as quick to remove, which may be preferable on very hot summer days when the velocity may exceed site limits, and far more convenient than an internal upgrade!
Rubberised textured finish makes single-action cocking comfortable, and we think it adds to the unique look of the H8R
The H8R is a fantastic airsoft revolver; however, despite the CO2 power source, the velocity can be a bit lacking compared to some other airsoft sidearms, especially in colder months.
The H8R Power pad is a simple solution: A very high density rubberised pad that fits onto the spur of the hammer. This increased inertia allows the CO2 valve to remain open for longer, providing more gas and thus more power.
Made from high-density poly tungsten, the pad also increases shot consistency due to working like a 'deadblow hammer', that is the flexible mass stops the hammer and valve from bouncing, providing a much more consistent shot-to-shot velocity.
Typical gain is 20-25fps with 0.28g BBs. Lighter BBs will actually gain a little less velocity than this due to the velocity limits of gas expansion; heavier BBs will also gain less velocity but overall more energy due to the increased mass. So it is most suited to lifting those heavier BBs: 0.28g, 0.32g, even up to 0.4g, for extra range in outdoor skirmish sites.
This is designed to fit the H8R Gen 1 and Gen 2 CO2 6mm airsoft revolvers, it may work on other airsoft revolvers if it fits on the hammer, however we cannot provide information on this, as we have only tested it on the H8R.
Package includes 1x H8R Power Pad, weighing 7g
This accessory is designed for airsoft and can only be used for airsoft.
Image 1 of 5
Image 2 of 5
Image 3 of 5
Image 4 of 5
Image 5 of 5